After the above conditions are met, the appearance of the product should be inspected, and there should be no stains or damage. The product should be packaged after passing the test. For the connectors with higher protection requirements, use bubble bags to protect them for easy transportation. Finally, seal the box and put it in warehouse delivery.
Product Application Questions
The most common failure modes for high-voltage wiring harnesses are the failure of hermetic detection and the overlap of the shield and the inner core terminal.
The most common reason for the failure of the plug-in air tightness detection is that the outer diameter of the wire is too small, so that the rubber ring and the wire cannot be tightly fitted under the maximum tightening state of the plug (when the single wire is sealed, the outer diameter of the wire is too small, and the sealing ring cannot achieve an interference fit). The connector and the wire are not airtight (easy to get water).