The wiring harness of the roof frame is routed along the wire hole of the large roof frame; the wiring harness of the reading light and the overhead air conditioner are fixed in the air duct with the body cable On the upper surface of the lower profile of the luggage rack hanger, when the lower bracket has a vertical profile, the wire harness is detoured from the inside of the lower profile (that is, the side of the side window) and then fixed on the upper surface of the lower profile of the hanger), so as to avoid affecting the luggage. Install the transition plate on the lower cover plate of the frame. Send it to the main wiring harness interface along the front pillar of the driver’s door (most buses are behind the driver’s door pillar).
When the distance between the top beams is large, the top frame wiring harness should be fixed with a special iron wire clamp (glue-coated 100*13) 3758-00005.
Note: The wiring harness installation direction of the driver on the right side of the export car is just opposite to that of the domestic car of the same model on the left and right sides.