Wire cutting and wire marking (wire number). Among them, wire cutting is to cut wires in batches (according to the number of models in the production plan) with a cutting and marking all-in-one machine according to the wire schedule, and the cut wires are bundled and identified with labels. The wire marking (wire number) is to mark both ends of the wire with a cutting and marking all-in-one machine according to the wire schedule and technical requirements.
Process requirements: The cutting length of the wire should be the length of the crimping area of ​​the terminal. After cutting, the insulation skin has no napping, and the inner core wire of the cut surface conductor has no damage or breakage.
Sub-line. After the wires of the same wire number are cut in batches, each wire is grouped into a set of wire harnesses.
Technological requirements: After straightening out the wires of the same line number, they are grouped by using the branching tooling board, and the bundled wires are placed on the pay-off frame and marked, so that the wire harness is smooth without twisting or messy phenomena.