Circulatory system
Before starting, first start the oil pump control system. After the oil pump control system is started, ensure that the lubricating parts of the air compressor are well lubricated. At the same time, the oil pump control system can adjust the internal oil pressure and oil temperature through the built-in temperature control valve to meet the system needs.
Air circulation system
When the compressor is working, the air is inhaled through the self-cleaning air filter, and the filter is automatically cleaned by the PLC. The air enters the primary compression after being automatically adjusted by the inlet guide vanes. The intercooler is cooled (water goes inside the pipe, gas goes outside the pipe, the water flow of the intercooler is required to be 110m/h) and then enters the secondary compression system, in order to prevent the gas in the system from pouring into the compression chamber (to avoid starting with pressure ) A hanging full-open check valve is installed in the exhaust pipe of the compressor. The gas discharged from the compressor pushes open the check valve and enters the exhaust muffler, then enters the first-level aftercooler, the second-level aftercooler, and then enters Main exhaust pipe.