Pay attention during processing
First, whether the use of raw materials is correct, such as wire withstand voltage, connector type and so on.
Second, the appearance of the terminal crimping meets the crimping specification, the tensile force value meets the requirements of Figure 3, and the terminal section meets the requirements of Figure 4.
Third, when cutting the corrugated pipe, the incision should be flush, and priority should be given to the cutting point of the corrugated pipe at the peak position to ensure the dimensional accuracy during processing and reduce the wear of the corrugated pipe mouth to the wire during use.
Fourth, the heat shrinkable tube should not be punctured, and the heat shrinkable position should be accurate.
Fifth, the content information of the printed label tube should be accurate and complete, and there should be no wrong tape or missing tape during processing.
Sixth, the connector ensures that the tightening torque meets the processing requirements.
Seventh, check whether the resistance value between the shielding layer and the inner core is satisfactory.
Eighth, by testing whether the relationship between the circuits of Taipower is correct, whether the withstand voltage of the wiring harness meets the standard, and the air tightness test meets the requirements.