Selection of adhesive tape for ABS wiring harness: Since the ABS system is a safety component, the working environment near the four wheel speed sensors is relatively complicated. When it is separated separately, it can be used in combination with PVC tape, flannelette, and polyester cloth tape.
Selection of airbag wiring harness and seat belt wiring harness: the airbag wiring harness and seat belt wiring harness are relatively special parts. Generally, the tape used is yellow PVC tape with a high temperature resistance of 85°C. The mark on the wiring harness can be selected from ordinary white PVC tape.
Storage conditions of the tape: room temperature 20 ~ 22 ℃, humidity 50% relative humidity, put the roll of tape flat in the original package and avoid direct light sources (such as lights, sunlight), and place it at a position above 20cm from the ground.
Conditions of use of the tape: In order to ensure good adhesion during the use of the tape, the surface of the wrapped object must be clean and dry to ensure that there is no grease and cloth dust, dust, wax, organic solvents, etc., and no typical cleaning agents Including esters (such as acetone), ketones (such as MEK) and NAPTHA-based products.