There are various forms of wire harness fixing clips. Such products can be used preferentially when it is necessary to maintain a set distance between the fixing point and the wire harness wiring or to avoid too much natural sagging length of the wire harness. In the production process of the wire harness assembly, the wire harness can be fixed on the buckle winding sheet with tape, and installed on the vehicle together with the wire harness. The fixed end is mostly fir tree type or arrow type
In the wire harness assembly, in addition to being used for wrapping the wire harness, the tape can also be used for the fixed protection of the wire harness in some positions. The current fixing solution for the roof harness is to fix it on the side panel and the roof beam by means of cable ties and buckles. In addition, there are fixing solutions for fixing the roof wiring harness to the inside of the roof by means of tape. This solution reduces the application of clips, because it is completed offline, and only needs to connect the connector to the main wiring harness of the body on the production line, which can improve the installation efficiency of the wiring harness. The wire harness with a larger diameter has better reliability performance, and the wire harness is directly in contact with the sheet metal when the tape is used to fix it, which is considered to be fireproof and flameproof. Therefore, the tape fixing is currently only used as an auxiliary measure to deal with it, and it is relatively applied on the body. limited.